Research and Publications
 
S. NoName of the AuthorTitle of the PaperJournalInternational/National
1Dr. Manoj KumarDevelopment of Erosion-corrosion Resistant Cold-spray Nanostructured Ni-20Cr Coating for Coal Fired Boiler ApplicationsJournal of Thermal Spray TechnologyInternational
2Dr. Manoj KumarDevelopment of Nano-crystalline Cold Sprayed Ni-20Cr Coatings for High Temperature Oxidation ResistanceSurface and Coating TechnologyInternational
3Dr. Manoj KumarErosion-corrosion Behaviour of Cold-spray Nanostructured Ni-20Cr Coatings in Actual Boiler EnvironmentWearInternational
4Dr. Manoj KumarStudy of Mechanical Properties and High Temperature Oxidation Behavior of a Novel Cold-spray Ni-20Cr Coating on Boiler SteelsApplied Surface ScienceInternational
5Dr. Manoj KumarFire Side Erosion-corrosion Protection of Boiler Tubes by Nano-structured CoatingsMaterial and CorrosionInternational
6Dr. Manoj KumarProduction of a Nano-Crystalline Ni-20Cr Coatings for High-Temperature ApplicationsJournal of Thermal Spray TechnologyInternational
7Dr. Manoj KumarSynthesis and deposition of Ni-20Cr powder using cold sprayingSurface EngineeringInternational
8Dr. Manoj KumarStudy of Ni-20Cr coatings for high temperature applications-a reviewArchives of Metallurgy and MaterialsInternational
9Dr. Manoj KumarMicrostructural Characterization of Nickel Nanoparticles Synthesized using Mechanical MillingInternational Journal of Enhanced Research in Science, Technology & Engineering, ISSN: 2319-7463International
10Dr. Manoj KumarApplication of Simultaneous Feedback Controller for Free and Forced Active Vibrations ControlInternational Journal of Engineering Sciences and Research Technology, ISSN: 2277-9655International
11Dr. Manoj KumarDevelopment of Cold Spray Nanostructured Ni-20Cr Coatings for High Temperature ApplicationsInternational Journal of Enhanced Research in Science, Technology and EngineeringInternational
12Dr. Manoj KumarFabrication of Hybrid MMC and their future scope -A ReviewInternational Research Journal of Engineering and Technology, ISSN: 2395-0072International
13Dr. Manoj KumarMechanical behaviour of particle reinforced aluminum matrix composites-A reviewInternational
14Dr. Manoj KumarMicrostructural Characterization of Nickel Nanoparticles Synthesized using Mechanical MillingInternational Journal of Enhanced Research in Science, Technology and Engineering, ISSN: 2319-7463International
15Dr. Manoj KumarExtraction and Transport Behavior of Tripodal Receptor: Selective Recovery of Ni2+ and Processing into Nickel Nano-particlesTransactions of the Institutions if Mining and Metallurgy, Section C: Mineral Processing and Extractive MetallurgyInternational
16Dr. Manoj KumarStudy of Oxidation Behavior of HVOF Sprayed Nanostructured Ni-20Cr Coating on SA 516 Boiler SteelInternational Journal of Surface Engineering and Materials TechnologyInternational
17Dr. Manoj KumarThermal Sprayed CNT Reinforced Nanocomposite Coatings – A ReviewThe Journal of Minerals and Materials Characterization and EngineeringInternational
18Dr. Manoj KumarA Comprehensive Study of Operational Condition For Turning Process to Optimize the Surface Roughness of ObjectInternational Journal of Emerging TechnologiesInternational
19Dr. Manoj KumarParametric Optimization of Gas Metal Arc Welding Processes Using Factorial Design ApproachJournal of Minerals and Materials Characterization and EngineeringInternational
20Dr. Manoj KumarMechanical Properties of Epoxy Resin – Fly Ash CompositeThe Journal of Minerals and Materials Characterization and EngineeringInternational
21Dr. Manoj KumarStudy of Wear Properties Of Al-SiC CompositesThe Journal of Minerals and Materials Characterization and EngineeringInternational
22Dr. Manoj KumarDevelopment of Aluminium Based Silicon Carbide Particulate Metal Matrix CompositeThe Journal of Minerals and Materials Characterization and EngineeringInternational
23Dr. Vinod RohillaPorosity exploration of SMA by Taguchi, regression analysis and genetic programmingJournal of Intelligent ManufacturingInternational
24Dr. Vinod RohillaFabrication of 6061 Aluminium Alloy Reinforced with Si3n4/N-Gr and Its Wear Performance Optimization Using Integrated RSM-GAParticulate Science and Technology an International JournalInternational
25Dr. Vinod RohillaGA Based Optimization using RSM in WEDM of Nimonic 90: A Nickel Based Super AlloyInternational Journal of Industrial and System EngineeringInternational
26Dr. Vinod RohillaAn experimental investigation and statistical modelling for trim cutting operation in WEDM of Nimonic-90International Journal of Industrial Engineering ComputationsInternational
27Dr. Vinod RohillaAn experimental study on trim cutting operation using metal powder mixed dielectric in WEDM of Nimonic-90Journal of Industrial Engineering ComputationsInternational
28Dr. Vinod RohillaAn experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach.Journal of Industrial Engineering InternationalInternational
29Dr. Vinod RohillaAn experimental and comparative study on rough and trim cutting operation in WEDM of hard to machine materials.Procedia Materials ScienceInternational
30Dr. Vinod RohillaPorosity exploration of SMA by Taguchi, regression analysis and genetic programmingJournal of Intelligent ManufacturingInternational
31Dr. Vinod RohillaEffect of process parameters on surface roughness of Nickel based alloys in WEDM.Recent Advances in Mechanical EngineeringInternational
32Rachin GoyalApplication of simultaneous feedback controller for free and Forced active vibrations controlInternational Journal of Engineering Sciences andResearch TechnologyInternational
33Rachin GoyalDevelopment of cold spray nanostructured ni-20cr coatings for high temperature applicationsInternational Journal of Enhanced Research in Science, Technology and EngineeringInternational
34Rachin GoyalMicrostructural characterization of nickel nanoparticles synthesized using mechanical milling,International Journal if Enhanced Research in Science, Technology and EngineeringInternational
35Rachin GoyalA systematic approach towards implementation of TPM in an automobile industryInternational Journal of Emerging Research in Management and TechnologyInternational
36Rachin GoyalPrediction of bead profile parameters for submerged arc welding of structural pipe steel,International Journal of Emerging Research in Management and TechnologyInternational
37Rachin GoyalMechanical Behaviour of Particle Reinforced Aluminium Matrix Composites: A ReviewInternational Journal for Innovative Research in Science and TechnologyInternational
38Amresh KumarMicrostructural characterization of nickel nanoparticles synthesized using mechanical millingInternational Journal of Enhanced Research in Science, Technology and Engineering, 2319-7463International
39Amresh KumarMechanical Behaviour of Particle Reinforced Aluminium Matrix Composites: A ReviewInternational Journal for Innovative Research in Science and TechnologyInternational
40Amresh KumarFabrication of Hybrid MMC and their future scope -A ReviewInternational Research Journal of Engineering and TechnologyInternational
41Amresh KumarDevelopment of Cold Spray Nanostructured Ni-20Cr Coatings for High Temperature ApplicationsInternational Journal of Enhanced Research in Science, Technology & EngineeringInternational
42Amresh KumarApplication of simultaneous feedback controller for free and Forced active vibrations controlInternational Journal of Engineering Sciences andResearch TechnologyInternational
43Amresh KumarAchieving Success of TPM on the Basis of Critical Success Factors: A Case StudyInternational Journal of Industrial Engineering PracticeInternational
44Shilpy BudhirajaInternal heat source in temperature rate dependent thermoelastic medium with hydrostatic initial stressMechanics and Mechanical EngineeringInternational
45Shilpy BudhirajaDisturbance in thermo-microstretch elastic medium with internal heat sourceMechanics of Advanced Materials and StructuresInternational
46Shilpy BudhirajaDisturbance in thermo-microstretch elastic medium with internal heat sourceMechanics of Advanced Materials and StructuresInternational
47Shilpy BudhirajaInternal heat source in temperature rate dependent thermoelasticity using dual-phase lag modelInternational Journal of Applied Mathematics and MechanicsInternational
48Shilpy BudhirajaDynamic problem in Green-Naghdi (Type III) thermoelastic half-space with two temperatureMechanics of Advanced Materials and StructuresInternational
49Shilpy BudhirajaDynamic problem in thermoelastic solid using dual phase lag- model with internal heat sourceJournal of Mathematical Sciences and ApplicationsInternational
50Shilpy BudhirajaDisturbance in generalized thermoelastic medium with internal heat source under hydrostatic initial stress and rotationInternational Journal of Mechanical Engineering and TechnologyInternational
51Shilpy BudhirajaEffect of hydrostatic initial stress and rotation in Green–Naghdi (Type III) thermoelastic half space with two temperatureInternational Journal of Applied Mathematics and MechanicsInternational
53Shilpy BudhirajaFibre-reinforced generalized thermoelastic medium under hydrostatic initial stressEngineeringInternational
54Shilpy BudhirajaEffect of hydrostatic initial stress in orthotropic generalized thermoelastic half-spaceJournal of Technical PhysicsInternational
55Shilpy BudhirajaEffect of hydrostatic initial stress and rotation in Green–Naghdi (Type III) thermoelastic half spaceMultidiscipline Modeling in Materials and StructureInternational
56Nikhilesh SinghPhysiological evaluation of manual lifting tasks on Indian male workersInternational Journal of Engineering and Advanced TechnologyInternational
57Gurdeep SinghAn Optimizationo Process Parameter of Friction Stir Welded Joint Aa 6063 Aluminium Alloy by Taguchi Oa L9 MethodInternational Journal for Scientific Research and DevelopmentInternational
58Gurdeep SinghImpact of Extruded Cast 5251 Al-B4c Surface Composite Fabricated using FspInternational Journal of Engineering ResearchInternational
59Sagar SetiaPerformance evaluation and regeneration of silica gel by using solar energy with Parabolic dish collectorInternational Journal of Latest Trends in Engineering and TechnologyInternational
60Jagdeep KmarSliding wear resistance of hardfacing alloys and their material removal mechanismInternational Journal of Engineering Research and TechnologyInternational
61Rozeena PraveenExperimental Investigation on The effect of fin pitch on the performance of plate type finInternational Journal of Research in Engineering and TechnologyInternational
62Mithun GoyalApplication of Finite Element Analysis to Assess Bone Strength of Patient Specific ModelInternational Journal of Science and ResearchInternational
63Ravinder KumarEffect of ZnO nanoparticles in R290/R600a based VCR added via lubricant oil on compressor characteristicsHeat Mass Transfer (Springer)International
64Ravinder KumarEffect of CuO nanoparticles on compressor characteristics in LPG based refrigeration cycle: An experimental investigationInternational Journal of Nusantara IslamInternational
65Swarn SinghEffect of Different Parameters on Internal Finishing of Brass Tubes Using Maf Method”International Journal of Nusantara IslamInternational
66Swarn SinghMicrostructural observation and Mechanical Testing of Hybrid Aluminium Composite Reinforced with Al2o3gr and B4c ParticlesInternational Journal of Nusantara IslamInternational
67Swarn SinghEffect of Magnetic Abrasives in Internal Finishing of Brass Tubes using MAF MethodJournal of Acad emia and Industrial ResearchInternational
68Harsimran SinghModification in Manufacturing Process of Rod K24 Leading to Reduction in overall Manufacturing Cost by Spm, New Bending and Chamfering operations.International Journal of Engineering and Innovative TechnologyInternational
69Harsimran SinghSProblem Fromulation for Designing Prosthetic Leg by Qfd TechniqueInternational Journal of Engineering and TechnologyInternational
70Harsimran SinghImplementation of Statistical Process Control Tools in an Autommobile Manufacturing UnitInternational Research Journal of Engineering and TechnologyInternational
71Harsimran Jeet SinghProblem Fromulation for Designing Prosthetic Leg by Qfd TechniqueInternational Journal of Engineering and TechnologyInternational
72Harsimran Jeet SinghImplementation of Statistical Process Control Tools in an Autommobile Manufacturing UnitInternational Research Journal of Engineering and TechnologyInternational
73Harsimran Jeet SinghTo Study the Wear Characteristics of AISI D3 SteelInternational Journal of Innovative Trends in EngineeringInternational
74Harsimran Jeet SinghDesign of E-Glass Epoxy Prosthetic LegInternational Journal of Engineering Research and TechnologyInternational
75Satwinder SinghExperimental Study of Counter Flow Air Dehumidifier for Different Packing HeightsInternational Research Journalm of Engineering and TechnologyInternational
76Satwinder SinghAn Experimental Study on the Perfromance of Liquid Desiccant Dehumidification SystemMechanica ConfabInternational
77Satwinder SinghEffect of Packing Height on the Performance of Liquid Desiccant DehumidifierMechanica ConfabInternational
78Santosh KumarPerformance and Emission Characteristics of Eucalyptus Oil and Diesel Blend in Four Stroke Single Cylinder Diesel EngineInternational Journal of Engineering Sciences and Research TechnologyInternational
79Santosh KumarPerformance and Emission Characteristics in a Diesel Engine Using Cotton Seed Oil and Diesel BlendInternational Journal of Enhanced Research in Science, Technology and EngineeringInternational
80Santosh KumarProductivity Enhancement Using DMAIC Approach: A Case StudyInternational Journal of Enhanced Research in Science, Technology and EngineeringInternational
81Vikas Guptaeffects of rice husk ash on mechanical properties of aluminum oxide reinforced metal matrix compositeInternational Journal of Scintific Research And DevelopmentInternational
82Vikas Guptainvestigation of mechanical and tribological properties of aluminum oxide and rice husk ash reinforced compositesParticulates Science and Technology (Taylor & Francis)International
83Vikas GuptaMicrostructural Study of Rice Husk Ash and Aluminum Oxide Reinforced CompositesJournal of Asian Ceramic Society (Elseiver)International
84Karan SinglaFriction Stir weldingInternational Journal of Research in Aeronautical and Mechanical EngineeringInternational
85Hardeep Singh BrarEvaluation of Scheduling Based Flexible Manufacturing SystemsInternational Journal of Technology and EngineeringInternational
86Hardeep Singh BrarFlexible Manufacturing Systems for Dynamic SchedulingInternational Journal of Technology and EngineeringInternational
87Bharat KaliaFlexible Manufacturing Systems for Dynamic SchedulingInternational Journal of Advanced Engineering and Research DepartmentInternational
88Bharat KaliaEffect of Boron carbide and Silicon carbide reinforced particles on the mechanical and metallurgical properties of friction stir welded joints of AA-6063 alloy.International Journal of Advanced Engineering and Research DepartmentInternational
89Harvinder SinghFriction Stir Processing of aluminum alloys: a ReviewInternational Acadmey of Engineering and Medical ResearchInternational
90Harvinder SinghRecent trends and application of Friction stir welding:A ReviewInternational Acadmey of Engineering and Medical ResearchInternational
91Harvinder SinghTo investigate the wear characteristics of deep cryogenic treated h11 hot working tool steelInternational Journal for Science and Advance Research in TechnologyInternational
92Harvinder SinghA study of process parameters wear characterstics of AISI D2 steelInternational Journal Engineering TechnologyInternational
93Harvinder SinghA Study of Process Parameters o Friction Stir Welded Aa 6061 Aluminum Alloy: A ReviewInternational Journal of Mechanical Engineering and TechnologyInternational
94Harvinder SinghEffect of Cryogenic Treatment on Microstructure of T-15 Tool SteelInternational Journal of Engineering Sciences and Research TechnologyInternational
95Harvinder SinghInfluence of minimal quantity lubrication (MQL) technique in machining evolution A review and applicationsInternational Journal of Advanced Research and InnovationInternational
96Harvinder SinghImplementation Difficulties of JIT Distribution in Supply Chain Management of Indian IndustriesInternational Journal of Advanced Research and InnovationInternational
97Harvinder SinghSmart Materials: New Trends in Structural EngineeringInternational Journal of Advanced Research and InnovationInternational
98Harvinder SinghStudy of Wear Characteristics of AISI H11 SteelInternational Journal of Engineering Sciences and Research TechnologyInternational
99Harvinder SinghTo analyze the wear resistance of compact faced valve seat influenced by TIG welding processInternational Journal of Mechanical EngineeringInternational
100Harvinder SinghStudy of Wear Characteristics of AISI D3 SteelInternational Journal of Innovative Trends in EngineeringInternational
101Harvinder SinghStudy of wear pattern behavior of mild steel discs using pin on disc tribometerInternational Journal of Science, Engineering and Technology ResearchInternational
102Harvinder SinghComparative Study Of Friction Stir Welding With A Fixed ShoulderGlobal Journal of Advanced Engineering Technologies and SciencesInternational
103Amandeep SinghEvaluation of Scheduling Based Flexible Manufacturing SystemsInternational Journal of  Technology and EngineeringInternational
104Amandeep SinghSurface Finishing using Abrasive Flow MachiningInternational Journal of Technology and  EngineeringInternational
105Amandeep SinghTowards to Fracture Mechanics FrameworkInternational Journal of Technology and  EngineeringInternational
106Devender SinghSurface Finishing using Abrasive Flow MachiningInternational Journal of Technology and  EngineeringInternational
107Atul AggarwalSurface Finishing using Abrasive Flow MachiningInternational Journal of Technology and  EngineeringInternational
108Aneesh GoyalStudy of wear pattern behavior of mild steel discs using pin on disc tribometerInternational Journal of Science, Engineering and Technology ResearchInternational
109Aneesh GoyalEffect of Cryogenic Treatment on Microstructure of T-15 Tool SteelInternational Journal of Engineering Sciences & Research TechnologyInternational
110Aneesh GoyalImplementation Difficulties of JIT Distribution in Supply Chain Management of Indian IndustriesInternational Journal of Advanced Research and InnovationInternational
111Aneesh GoyalInfluence of minimal quantity lubrication (MQL) technique in machining evolution A review and applicationsInternational Journal of Advanced Research and InnovationInternational
112Aneesh GoyalSmart Materials: New Trends in Structural EngineeringInternational Journal of Advanced Research and InnovationInternational

List of paper published in International/National Conferences:

S. NoAuthor NameTitle of the PaperName of ConferenceInternational/National
1Dr. Manoj KumarEvaluation of High Temperature Oxidation Behavior of a Cold Spray Ni-20Cr Nano-structured Coating‘International Conference of Thermal Spray Coatings (ITSC-2016)’, to be held at Shanghai, China, 11-12 May 2016International
2Dr. Manoj KumarDeposition of Nanostructured Coating and Investigation of Erosion-Corrosion Behaviour in Actual Coal Fired Boiler17th Asian Pacific Corrosion Control Conference (APCCC)’, to be held at IIT Bombay (India), from 27-30 January 2016International
3Dr. Vinod RohillaEffect of WEDM Parameters on Machinability of Titanium alloys Ti6AlNbIOSR Journal of Mechanical and Civil EngineeringNational
4Dr. Vinod RohillaSurface integrity analysis of machined surface after rough cutting operation in WEDM.IOSR Journal of Mechanical and Civil EngineeringNational
5Dr. Vinod RohillaStudy of Process Parameters on Surface Roughness of Nimonic 90 in WEDM.SSRG International Journal of Mechanical EngineeringNational
6Dr. Vinod RohillaStudy The Effect of WEDM Parameters on Machinability of Monel 400.National Conference NCASEmeNational
7Dr. Vinod RohillaOptimization of Surface Roughness In Wire Electrical Discharge Machining of Nickel Based super AlloyInternational Journal of Engineering Research & Technology (IJERT)National
8Rachin GoyalRole of Lean Manufacturing for Optimum Industrial Use.International Conference on Management held at Indo Global College of Engineering, Abhipur, Punjab IndiaInternational
9Rachin GoyalBridging the Gap in Theory and Practice in the Times of Economic RecessionInternational Conference on Management held at Indo Global College of Engineering, Abhipur, Punjab IndiaInternational
10Rachin GoyalInfringement of Intellectual Property Rights2nd International Conference on Production and Industrial Engineering, CPIE-2010, held at NIT, JalandharInternational
11Rachin GoyalAchieving Success of TPM on the Basis of Critical Success Factors of ImplementationInternational Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, held at PTU, JalandharInternational
12Rachin GoyalAchieving success of TPM through the Basics – A Case StudyInternational Conference on emerging trends in Mechanical and computer Engineering at Ganapati Institutes, Bilaspur, HaryanaInternational
13Rachin GoyalReview of management strategies adopted by leading industriesNational Conference on TIME-2k8 held at CEC, LandranNational
14Rachin Goyal5S: An excellent tool for Workplace Management: A Case studyNational Conference on TIME-2k8 held at CEC, LandranNational
15Rachin GoyalModernization through MaintenanceNational Conference on Welding Technology held at SLIET, LongowalNational
16Rachin GoyalMeasurement of Corporate Performance Using Balanced ScorecardNational Conference on Welding Technology held at SLIET, LongowalNational
17Rachin GoyalIntellectual Property Rights (IPRs) for the Professionals: Need of the HourNational Conference on Advances in Mechanical Engineering held at BBSBEC, Fatehgarh SahibNational
18Rachin GoyalActive Vibrations Control of Free Vibrations Using Optimal Feedback Controller1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, ChandigarhNational
19Rachin GoyalHybrid Machining: Latest Trend in Non-Conventional Machining Processes1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, ChandigarhNational
20Amresh KumarFabrication of composites and Hybrid Composites-A ReviewNational Conference on Recent Advancements in Production EngineeringNational
21Amresh KumarAchieving Success of TPM on the Basis of Critical Success Factors of ImplementationInternational Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, held at PTU, JalandharInternational
22Amresh KumarAchieving success of TPM through the Basics – A Case StudyInternational Conference on emerging trends in Mechanical and computer Engineering at Ganapati Institutes, Bilaspur, HaryanaInternational
23Amresh KumarStudy of Cement Ball MillNational Conference on TIME-2k8 held at CEC, LandranNational
24Amresh KumarIntellectual Property Rights (IPRs) for the Professionals: Need of the HourNational Conference on Advances in Mechanical Engineering held at BBSBEC, Fatehgarh SahibNational
25Amresh KumarIdentification of critical factors for successful implementation of Total Productive Maintenance1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, ChandigarhNational
26Amresh KumarHybrid Machining: Latest Trend in Non-Conventional Machining Processes1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, ChandigarhNational
27Shilpy BudhirajaPlane Strain deformation in generalized thermoelastic mediumInnovative trends in Mathematical SciencesNational
28Shilpy BudhirajaEffect of hydrostatic initial stress on temperature rate dependent thermoelastic mediumRecent Developments on Mathematical Modeling and Fuzziology (M2-FZY)National
29Rozeena PraveenDistributed Power Supply by Using Green Power Generation Technology: Survey ApproachNational conference on AMEET-2012National
30Rozeena PraveenHeat Transfer by Electronic coolingNational conference on AMEET-2012National
31Jagdeep KumarFriction and wear properties of hardfacing alloysIETET – 2016International
32Jagdeep KumarTime ManagementIETET – 2016International
33Jagdeep KumarEffect of microstructure on sliding wear behaviour of Fe- Cr-C hardfacing alloysICRIET-2016International
34Satwinder SinghA Novel Study on Dehumidification Processes: A ReviewAdvances in Materials and Manufacturing TechnologyInternational
35Harsimran SinghStructural Analysis of Crane Hook using Finite Element Analysis(Fea)National Congress on Science, Technology, Engineering,National
36Harsimran SinghFlow Simulation Analysis of L Shaped Pipe of Stainless Steel MaterialNational Congress on Science, Technology, Engineering,National
37Harsimran SinghReduction in Overall Manufacturing Cost by (Spm,New Bending &Chamfering) operations of Rod K24National Congress on Science, Technology, Engineering,National
38sagar Setiareduction of non fill percentage in hub front component by using six sigma quality improvement tool”National Conference ICTNational
39sagar Setia“Friction Compensation and Friction Model”, JCDM college of engg. Sirsa(Haryana).National Conference on Recent Advances in Engineering Technology and Environmental Issues (RAETE-2012)
40Ravinder KumarPerformance investigation of vapour compression based refrigerator with the recovery of condensation heatConference on Recent Trends in Mechanical EngineeringNational
41Ravinder KumarA Review on effect of nanorefrigerants on the performance of refrigeration and air conditioning systemConference on Recent Trends in Mechanical EngineeringNational
42Ravinder KumarExperimental investigation of CuO nano particles as a lubricant additive for LPG based VCR SystemConference on Recent Trends in Mechanical EngineeringNational
43Ravinder KumarExperimental study on pull down and energy consumption characteristics with additives in VCR incorporated with SLHXConference on Recent Trends in Mechanical EngineeringNational
44Sagar SetiaImplementation of Six Sigma in Small & Large scale Industries-A StudyAn annual research journal,GGGI,DinarpurNational
45Sagar SetiaPerformance Analysis & Emission characteristion of various blends of Mustard oil on Automotive C.I Multicylinder EngineAn annual research journal,GGGI,DinarpurNational
46Sagar SetiaOptimization of kirloskar made single cylinder diesel engine by using response surface methodologyNational Conference on Recent Advances in Engineering TechnologyNational
 

Facilities for Students:

Special attention on weaker students Extra classes Student counselling Timely telephonic conversation with parents Equity action plan Increasing practical skills Motivation PPTs, Videos and links provided Weekly class tests Short term courses Expert talks Arranging Seminars etc.

Facilities for Faculty:

Mess facility with vegetarian meals only. In campus dispensary to provide medical assistance to faculty. Free parking two wheeler/car facilities at designated places only. (Without charges). 5 eating joints at different locations. Power backup for light load. Free internet connectivity through personal login portal service. ATM facility inside the campus. For safety and security CCTV cameras are also present. Presence of Online library access catalogue.



PAY FEE ONLINE