S. No | Name of the Author | Title of the Paper | Journal | International/National |
---|---|---|---|---|
1 | Dr. Manoj Kumar | Development of Erosion-corrosion Resistant Cold-spray Nanostructured Ni-20Cr Coating for Coal Fired Boiler Applications | Journal of Thermal Spray Technology | International |
2 | Dr. Manoj Kumar | Development of Nano-crystalline Cold Sprayed Ni-20Cr Coatings for High Temperature Oxidation Resistance | Surface and Coating Technology | International |
3 | Dr. Manoj Kumar | Erosion-corrosion Behaviour of Cold-spray Nanostructured Ni-20Cr Coatings in Actual Boiler Environment | Wear | International |
4 | Dr. Manoj Kumar | Study of Mechanical Properties and High Temperature Oxidation Behavior of a Novel Cold-spray Ni-20Cr Coating on Boiler Steels | Applied Surface Science | International |
5 | Dr. Manoj Kumar | Fire Side Erosion-corrosion Protection of Boiler Tubes by Nano-structured Coatings | Material and Corrosion | International |
6 | Dr. Manoj Kumar | Production of a Nano-Crystalline Ni-20Cr Coatings for High-Temperature Applications | Journal of Thermal Spray Technology | International |
7 | Dr. Manoj Kumar | Synthesis and deposition of Ni-20Cr powder using cold spraying | Surface Engineering | International |
8 | Dr. Manoj Kumar | Study of Ni-20Cr coatings for high temperature applications-a review | Archives of Metallurgy and Materials | International |
9 | Dr. Manoj Kumar | Microstructural Characterization of Nickel Nanoparticles Synthesized using Mechanical Milling | International Journal of Enhanced Research in Science, Technology & Engineering, ISSN: 2319-7463 | International |
10 | Dr. Manoj Kumar | Application of Simultaneous Feedback Controller for Free and Forced Active Vibrations Control | International Journal of Engineering Sciences and Research Technology, ISSN: 2277-9655 | International |
11 | Dr. Manoj Kumar | Development of Cold Spray Nanostructured Ni-20Cr Coatings for High Temperature Applications | International Journal of Enhanced Research in Science, Technology and Engineering | International |
12 | Dr. Manoj Kumar | Fabrication of Hybrid MMC and their future scope -A Review | International Research Journal of Engineering and Technology, ISSN: 2395-0072 | International |
13 | Dr. Manoj Kumar | Mechanical behaviour of particle reinforced aluminum matrix composites-A review | International | |
14 | Dr. Manoj Kumar | Microstructural Characterization of Nickel Nanoparticles Synthesized using Mechanical Milling | International Journal of Enhanced Research in Science, Technology and Engineering, ISSN: 2319-7463 | International |
15 | Dr. Manoj Kumar | Extraction and Transport Behavior of Tripodal Receptor: Selective Recovery of Ni2+ and Processing into Nickel Nano-particles | Transactions of the Institutions if Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy | International |
16 | Dr. Manoj Kumar | Study of Oxidation Behavior of HVOF Sprayed Nanostructured Ni-20Cr Coating on SA 516 Boiler Steel | International Journal of Surface Engineering and Materials Technology | International |
17 | Dr. Manoj Kumar | Thermal Sprayed CNT Reinforced Nanocomposite Coatings – A Review | The Journal of Minerals and Materials Characterization and Engineering | International |
18 | Dr. Manoj Kumar | A Comprehensive Study of Operational Condition For Turning Process to Optimize the Surface Roughness of Object | International Journal of Emerging Technologies | International |
19 | Dr. Manoj Kumar | Parametric Optimization of Gas Metal Arc Welding Processes Using Factorial Design Approach | Journal of Minerals and Materials Characterization and Engineering | International |
20 | Dr. Manoj Kumar | Mechanical Properties of Epoxy Resin – Fly Ash Composite | The Journal of Minerals and Materials Characterization and Engineering | International |
21 | Dr. Manoj Kumar | Study of Wear Properties Of Al-SiC Composites | The Journal of Minerals and Materials Characterization and Engineering | International |
22 | Dr. Manoj Kumar | Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite | The Journal of Minerals and Materials Characterization and Engineering | International |
23 | Dr. Vinod Rohilla | Porosity exploration of SMA by Taguchi, regression analysis and genetic programming | Journal of Intelligent Manufacturing | International |
24 | Dr. Vinod Rohilla | Fabrication of 6061 Aluminium Alloy Reinforced with Si3n4/N-Gr and Its Wear Performance Optimization Using Integrated RSM-GA | Particulate Science and Technology an International Journal | International |
25 | Dr. Vinod Rohilla | GA Based Optimization using RSM in WEDM of Nimonic 90: A Nickel Based Super Alloy | International Journal of Industrial and System Engineering | International |
26 | Dr. Vinod Rohilla | An experimental investigation and statistical modelling for trim cutting operation in WEDM of Nimonic-90 | International Journal of Industrial Engineering Computations | International |
27 | Dr. Vinod Rohilla | An experimental study on trim cutting operation using metal powder mixed dielectric in WEDM of Nimonic-90 | Journal of Industrial Engineering Computations | International |
28 | Dr. Vinod Rohilla | An experimental analysis and optimization of machining rate and surface characteristics in WEDM of Monel-400 using RSM and desirability approach. | Journal of Industrial Engineering International | International |
29 | Dr. Vinod Rohilla | An experimental and comparative study on rough and trim cutting operation in WEDM of hard to machine materials. | Procedia Materials Science | International |
30 | Dr. Vinod Rohilla | Porosity exploration of SMA by Taguchi, regression analysis and genetic programming | Journal of Intelligent Manufacturing | International |
31 | Dr. Vinod Rohilla | Effect of process parameters on surface roughness of Nickel based alloys in WEDM. | Recent Advances in Mechanical Engineering | International |
32 | Rachin Goyal | Application of simultaneous feedback controller for free and Forced active vibrations control | International Journal of Engineering Sciences andResearch Technology | International |
33 | Rachin Goyal | Development of cold spray nanostructured ni-20cr coatings for high temperature applications | International Journal of Enhanced Research in Science, Technology and Engineering | International |
34 | Rachin Goyal | Microstructural characterization of nickel nanoparticles synthesized using mechanical milling, | International Journal if Enhanced Research in Science, Technology and Engineering | International |
35 | Rachin Goyal | A systematic approach towards implementation of TPM in an automobile industry | International Journal of Emerging Research in Management and Technology | International |
36 | Rachin Goyal | Prediction of bead profile parameters for submerged arc welding of structural pipe steel, | International Journal of Emerging Research in Management and Technology | International |
37 | Rachin Goyal | Mechanical Behaviour of Particle Reinforced Aluminium Matrix Composites: A Review | International Journal for Innovative Research in Science and Technology | International |
38 | Amresh Kumar | Microstructural characterization of nickel nanoparticles synthesized using mechanical milling | International Journal of Enhanced Research in Science, Technology and Engineering, 2319-7463 | International |
39 | Amresh Kumar | Mechanical Behaviour of Particle Reinforced Aluminium Matrix Composites: A Review | International Journal for Innovative Research in Science and Technology | International |
40 | Amresh Kumar | Fabrication of Hybrid MMC and their future scope -A Review | International Research Journal of Engineering and Technology | International |
41 | Amresh Kumar | Development of Cold Spray Nanostructured Ni-20Cr Coatings for High Temperature Applications | International Journal of Enhanced Research in Science, Technology & Engineering | International |
42 | Amresh Kumar | Application of simultaneous feedback controller for free and Forced active vibrations control | International Journal of Engineering Sciences andResearch Technology | International |
43 | Amresh Kumar | Achieving Success of TPM on the Basis of Critical Success Factors: A Case Study | International Journal of Industrial Engineering Practice | International |
44 | Shilpy Budhiraja | Internal heat source in temperature rate dependent thermoelastic medium with hydrostatic initial stress | Mechanics and Mechanical Engineering | International |
45 | Shilpy Budhiraja | Disturbance in thermo-microstretch elastic medium with internal heat source | Mechanics of Advanced Materials and Structures | International |
46 | Shilpy Budhiraja | Disturbance in thermo-microstretch elastic medium with internal heat source | Mechanics of Advanced Materials and Structures | International |
47 | Shilpy Budhiraja | Internal heat source in temperature rate dependent thermoelasticity using dual-phase lag model | International Journal of Applied Mathematics and Mechanics | International |
48 | Shilpy Budhiraja | Dynamic problem in Green-Naghdi (Type III) thermoelastic half-space with two temperature | Mechanics of Advanced Materials and Structures | International |
49 | Shilpy Budhiraja | Dynamic problem in thermoelastic solid using dual phase lag- model with internal heat source | Journal of Mathematical Sciences and Applications | International |
50 | Shilpy Budhiraja | Disturbance in generalized thermoelastic medium with internal heat source under hydrostatic initial stress and rotation | International Journal of Mechanical Engineering and Technology | International |
51 | Shilpy Budhiraja | Effect of hydrostatic initial stress and rotation in Green–Naghdi (Type III) thermoelastic half space with two temperature | International Journal of Applied Mathematics and Mechanics | International |
53 | Shilpy Budhiraja | Fibre-reinforced generalized thermoelastic medium under hydrostatic initial stress | Engineering | International |
54 | Shilpy Budhiraja | Effect of hydrostatic initial stress in orthotropic generalized thermoelastic half-space | Journal of Technical Physics | International |
55 | Shilpy Budhiraja | Effect of hydrostatic initial stress and rotation in Green–Naghdi (Type III) thermoelastic half space | Multidiscipline Modeling in Materials and Structure | International |
56 | Nikhilesh Singh | Physiological evaluation of manual lifting tasks on Indian male workers | International Journal of Engineering and Advanced Technology | International |
57 | Gurdeep Singh | An Optimizationo Process Parameter of Friction Stir Welded Joint Aa 6063 Aluminium Alloy by Taguchi Oa L9 Method | International Journal for Scientific Research and Development | International |
58 | Gurdeep Singh | Impact of Extruded Cast 5251 Al-B4c Surface Composite Fabricated using Fsp | International Journal of Engineering Research | International |
59 | Sagar Setia | Performance evaluation and regeneration of silica gel by using solar energy with Parabolic dish collector | International Journal of Latest Trends in Engineering and Technology | International |
60 | Jagdeep Kmar | Sliding wear resistance of hardfacing alloys and their material removal mechanism | International Journal of Engineering Research and Technology | International |
61 | Rozeena Praveen | Experimental Investigation on The effect of fin pitch on the performance of plate type fin | International Journal of Research in Engineering and Technology | International |
62 | Mithun Goyal | Application of Finite Element Analysis to Assess Bone Strength of Patient Specific Model | International Journal of Science and Research | International |
63 | Ravinder Kumar | Effect of ZnO nanoparticles in R290/R600a based VCR added via lubricant oil on compressor characteristics | Heat Mass Transfer (Springer) | International |
64 | Ravinder Kumar | Effect of CuO nanoparticles on compressor characteristics in LPG based refrigeration cycle: An experimental investigation | International Journal of Nusantara Islam | International |
65 | Swarn Singh | Effect of Different Parameters on Internal Finishing of Brass Tubes Using Maf Method” | International Journal of Nusantara Islam | International |
66 | Swarn Singh | Microstructural observation and Mechanical Testing of Hybrid Aluminium Composite Reinforced with Al2o3gr and B4c Particles | International Journal of Nusantara Islam | International |
67 | Swarn Singh | Effect of Magnetic Abrasives in Internal Finishing of Brass Tubes using MAF Method | Journal of Acad emia and Industrial Research | International |
68 | Harsimran Singh | Modification in Manufacturing Process of Rod K24 Leading to Reduction in overall Manufacturing Cost by Spm, New Bending and Chamfering operations. | International Journal of Engineering and Innovative Technology | International |
69 | Harsimran Singh | SProblem Fromulation for Designing Prosthetic Leg by Qfd Technique | International Journal of Engineering and Technology | International |
70 | Harsimran Singh | Implementation of Statistical Process Control Tools in an Autommobile Manufacturing Unit | International Research Journal of Engineering and Technology | International |
71 | Harsimran Jeet Singh | Problem Fromulation for Designing Prosthetic Leg by Qfd Technique | International Journal of Engineering and Technology | International |
72 | Harsimran Jeet Singh | Implementation of Statistical Process Control Tools in an Autommobile Manufacturing Unit | International Research Journal of Engineering and Technology | International |
73 | Harsimran Jeet Singh | To Study the Wear Characteristics of AISI D3 Steel | International Journal of Innovative Trends in Engineering | International |
74 | Harsimran Jeet Singh | Design of E-Glass Epoxy Prosthetic Leg | International Journal of Engineering Research and Technology | International |
75 | Satwinder Singh | Experimental Study of Counter Flow Air Dehumidifier for Different Packing Heights | International Research Journalm of Engineering and Technology | International |
76 | Satwinder Singh | An Experimental Study on the Perfromance of Liquid Desiccant Dehumidification System | Mechanica Confab | International |
77 | Satwinder Singh | Effect of Packing Height on the Performance of Liquid Desiccant Dehumidifier | Mechanica Confab | International |
78 | Santosh Kumar | Performance and Emission Characteristics of Eucalyptus Oil and Diesel Blend in Four Stroke Single Cylinder Diesel Engine | International Journal of Engineering Sciences and Research Technology | International |
79 | Santosh Kumar | Performance and Emission Characteristics in a Diesel Engine Using Cotton Seed Oil and Diesel Blend | International Journal of Enhanced Research in Science, Technology and Engineering | International |
80 | Santosh Kumar | Productivity Enhancement Using DMAIC Approach: A Case Study | International Journal of Enhanced Research in Science, Technology and Engineering | International |
81 | Vikas Gupta | effects of rice husk ash on mechanical properties of aluminum oxide reinforced metal matrix composite | International Journal of Scintific Research And Development | International |
82 | Vikas Gupta | investigation of mechanical and tribological properties of aluminum oxide and rice husk ash reinforced composites | Particulates Science and Technology (Taylor & Francis) | International |
83 | Vikas Gupta | Microstructural Study of Rice Husk Ash and Aluminum Oxide Reinforced Composites | Journal of Asian Ceramic Society (Elseiver) | International |
84 | Karan Singla | Friction Stir welding | International Journal of Research in Aeronautical and Mechanical Engineering | International |
85 | Hardeep Singh Brar | Evaluation of Scheduling Based Flexible Manufacturing Systems | International Journal of Technology and Engineering | International |
86 | Hardeep Singh Brar | Flexible Manufacturing Systems for Dynamic Scheduling | International Journal of Technology and Engineering | International |
87 | Bharat Kalia | Flexible Manufacturing Systems for Dynamic Scheduling | International Journal of Advanced Engineering and Research Department | International |
88 | Bharat Kalia | Effect of Boron carbide and Silicon carbide reinforced particles on the mechanical and metallurgical properties of friction stir welded joints of AA-6063 alloy. | International Journal of Advanced Engineering and Research Department | International |
89 | Harvinder Singh | Friction Stir Processing of aluminum alloys: a Review | International Acadmey of Engineering and Medical Research | International |
90 | Harvinder Singh | Recent trends and application of Friction stir welding:A Review | International Acadmey of Engineering and Medical Research | International |
91 | Harvinder Singh | To investigate the wear characteristics of deep cryogenic treated h11 hot working tool steel | International Journal for Science and Advance Research in Technology | International |
92 | Harvinder Singh | A study of process parameters wear characterstics of AISI D2 steel | International Journal Engineering Technology | International |
93 | Harvinder Singh | A Study of Process Parameters o Friction Stir Welded Aa 6061 Aluminum Alloy: A Review | International Journal of Mechanical Engineering and Technology | International |
94 | Harvinder Singh | Effect of Cryogenic Treatment on Microstructure of T-15 Tool Steel | International Journal of Engineering Sciences and Research Technology | International |
95 | Harvinder Singh | Influence of minimal quantity lubrication (MQL) technique in machining evolution A review and applications | International Journal of Advanced Research and Innovation | International |
96 | Harvinder Singh | Implementation Difficulties of JIT Distribution in Supply Chain Management of Indian Industries | International Journal of Advanced Research and Innovation | International |
97 | Harvinder Singh | Smart Materials: New Trends in Structural Engineering | International Journal of Advanced Research and Innovation | International |
98 | Harvinder Singh | Study of Wear Characteristics of AISI H11 Steel | International Journal of Engineering Sciences and Research Technology | International |
99 | Harvinder Singh | To analyze the wear resistance of compact faced valve seat influenced by TIG welding process | International Journal of Mechanical Engineering | International |
100 | Harvinder Singh | Study of Wear Characteristics of AISI D3 Steel | International Journal of Innovative Trends in Engineering | International |
101 | Harvinder Singh | Study of wear pattern behavior of mild steel discs using pin on disc tribometer | International Journal of Science, Engineering and Technology Research | International |
102 | Harvinder Singh | Comparative Study Of Friction Stir Welding With A Fixed Shoulder | Global Journal of Advanced Engineering Technologies and Sciences | International |
103 | Amandeep Singh | Evaluation of Scheduling Based Flexible Manufacturing Systems | International Journal of Technology and Engineering | International |
104 | Amandeep Singh | Surface Finishing using Abrasive Flow Machining | International Journal of Technology and Engineering | International |
105 | Amandeep Singh | Towards to Fracture Mechanics Framework | International Journal of Technology and Engineering | International |
106 | Devender Singh | Surface Finishing using Abrasive Flow Machining | International Journal of Technology and Engineering | International |
107 | Atul Aggarwal | Surface Finishing using Abrasive Flow Machining | International Journal of Technology and Engineering | International |
108 | Aneesh Goyal | Study of wear pattern behavior of mild steel discs using pin on disc tribometer | International Journal of Science, Engineering and Technology Research | International |
109 | Aneesh Goyal | Effect of Cryogenic Treatment on Microstructure of T-15 Tool Steel | International Journal of Engineering Sciences & Research Technology | International |
110 | Aneesh Goyal | Implementation Difficulties of JIT Distribution in Supply Chain Management of Indian Industries | International Journal of Advanced Research and Innovation | International |
111 | Aneesh Goyal | Influence of minimal quantity lubrication (MQL) technique in machining evolution A review and applications | International Journal of Advanced Research and Innovation | International |
112 | Aneesh Goyal | Smart Materials: New Trends in Structural Engineering | International Journal of Advanced Research and Innovation | International |
List of paper published in International/National Conferences:
S. No | Author Name | Title of the Paper | Name of Conference | International/National |
---|---|---|---|---|
1 | Dr. Manoj Kumar | Evaluation of High Temperature Oxidation Behavior of a Cold Spray Ni-20Cr Nano-structured Coating | ‘International Conference of Thermal Spray Coatings (ITSC-2016)’, to be held at Shanghai, China, 11-12 May 2016 | International |
2 | Dr. Manoj Kumar | Deposition of Nanostructured Coating and Investigation of Erosion-Corrosion Behaviour in Actual Coal Fired Boiler | 17th Asian Pacific Corrosion Control Conference (APCCC)’, to be held at IIT Bombay (India), from 27-30 January 2016 | International |
3 | Dr. Vinod Rohilla | Effect of WEDM Parameters on Machinability of Titanium alloys Ti6AlNb | IOSR Journal of Mechanical and Civil Engineering | National |
4 | Dr. Vinod Rohilla | Surface integrity analysis of machined surface after rough cutting operation in WEDM. | IOSR Journal of Mechanical and Civil Engineering | National |
5 | Dr. Vinod Rohilla | Study of Process Parameters on Surface Roughness of Nimonic 90 in WEDM. | SSRG International Journal of Mechanical Engineering | National |
6 | Dr. Vinod Rohilla | Study The Effect of WEDM Parameters on Machinability of Monel 400. | National Conference NCASEme | National |
7 | Dr. Vinod Rohilla | Optimization of Surface Roughness In Wire Electrical Discharge Machining of Nickel Based super Alloy | International Journal of Engineering Research & Technology (IJERT) | National |
8 | Rachin Goyal | Role of Lean Manufacturing for Optimum Industrial Use. | International Conference on Management held at Indo Global College of Engineering, Abhipur, Punjab India | International |
9 | Rachin Goyal | Bridging the Gap in Theory and Practice in the Times of Economic Recession | International Conference on Management held at Indo Global College of Engineering, Abhipur, Punjab India | International |
10 | Rachin Goyal | Infringement of Intellectual Property Rights | 2nd International Conference on Production and Industrial Engineering, CPIE-2010, held at NIT, Jalandhar | International |
11 | Rachin Goyal | Achieving Success of TPM on the Basis of Critical Success Factors of Implementation | International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, held at PTU, Jalandhar | International |
12 | Rachin Goyal | Achieving success of TPM through the Basics – A Case Study | International Conference on emerging trends in Mechanical and computer Engineering at Ganapati Institutes, Bilaspur, Haryana | International |
13 | Rachin Goyal | Review of management strategies adopted by leading industries | National Conference on TIME-2k8 held at CEC, Landran | National |
14 | Rachin Goyal | 5S: An excellent tool for Workplace Management: A Case study | National Conference on TIME-2k8 held at CEC, Landran | National |
15 | Rachin Goyal | Modernization through Maintenance | National Conference on Welding Technology held at SLIET, Longowal | National |
16 | Rachin Goyal | Measurement of Corporate Performance Using Balanced Scorecard | National Conference on Welding Technology held at SLIET, Longowal | National |
17 | Rachin Goyal | Intellectual Property Rights (IPRs) for the Professionals: Need of the Hour | National Conference on Advances in Mechanical Engineering held at BBSBEC, Fatehgarh Sahib | National |
18 | Rachin Goyal | Active Vibrations Control of Free Vibrations Using Optimal Feedback Controller | 1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, Chandigarh | National |
19 | Rachin Goyal | Hybrid Machining: Latest Trend in Non-Conventional Machining Processes | 1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, Chandigarh | National |
20 | Amresh Kumar | Fabrication of composites and Hybrid Composites-A Review | National Conference on Recent Advancements in Production Engineering | National |
21 | Amresh Kumar | Achieving Success of TPM on the Basis of Critical Success Factors of Implementation | International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, held at PTU, Jalandhar | International |
22 | Amresh Kumar | Achieving success of TPM through the Basics – A Case Study | International Conference on emerging trends in Mechanical and computer Engineering at Ganapati Institutes, Bilaspur, Haryana | International |
23 | Amresh Kumar | Study of Cement Ball Mill | National Conference on TIME-2k8 held at CEC, Landran | National |
24 | Amresh Kumar | Intellectual Property Rights (IPRs) for the Professionals: Need of the Hour | National Conference on Advances in Mechanical Engineering held at BBSBEC, Fatehgarh Sahib | National |
25 | Amresh Kumar | Identification of critical factors for successful implementation of Total Productive Maintenance | 1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, Chandigarh | National |
26 | Amresh Kumar | Hybrid Machining: Latest Trend in Non-Conventional Machining Processes | 1st National Conference on Advances in Mechanical Engineering (NCAME-2011), UIET, Panjab University, Chandigarh | National |
27 | Shilpy Budhiraja | Plane Strain deformation in generalized thermoelastic medium | Innovative trends in Mathematical Sciences | National |
28 | Shilpy Budhiraja | Effect of hydrostatic initial stress on temperature rate dependent thermoelastic medium | Recent Developments on Mathematical Modeling and Fuzziology (M2-FZY) | National |
29 | Rozeena Praveen | Distributed Power Supply by Using Green Power Generation Technology: Survey Approach | National conference on AMEET-2012 | National |
30 | Rozeena Praveen | Heat Transfer by Electronic cooling | National conference on AMEET-2012 | National |
31 | Jagdeep Kumar | Friction and wear properties of hardfacing alloys | IETET – 2016 | International |
32 | Jagdeep Kumar | Time Management | IETET – 2016 | International |
33 | Jagdeep Kumar | Effect of microstructure on sliding wear behaviour of Fe- Cr-C hardfacing alloys | ICRIET-2016 | International |
34 | Satwinder Singh | A Novel Study on Dehumidification Processes: A Review | Advances in Materials and Manufacturing Technology | International |
35 | Harsimran Singh | Structural Analysis of Crane Hook using Finite Element Analysis(Fea) | National Congress on Science, Technology, Engineering, | National |
36 | Harsimran Singh | Flow Simulation Analysis of L Shaped Pipe of Stainless Steel Material | National Congress on Science, Technology, Engineering, | National |
37 | Harsimran Singh | Reduction in Overall Manufacturing Cost by (Spm,New Bending &Chamfering) operations of Rod K24 | National Congress on Science, Technology, Engineering, | National |
38 | sagar Setia | reduction of non fill percentage in hub front component by using six sigma quality improvement tool” | National Conference ICT | National |
39 | sagar Setia | “Friction Compensation and Friction Model”, JCDM college of engg. Sirsa(Haryana). | National Conference on Recent Advances in Engineering Technology and Environmental Issues (RAETE-2012) | |
40 | Ravinder Kumar | Performance investigation of vapour compression based refrigerator with the recovery of condensation heat | Conference on Recent Trends in Mechanical Engineering | National |
41 | Ravinder Kumar | A Review on effect of nanorefrigerants on the performance of refrigeration and air conditioning system | Conference on Recent Trends in Mechanical Engineering | National |
42 | Ravinder Kumar | Experimental investigation of CuO nano particles as a lubricant additive for LPG based VCR System | Conference on Recent Trends in Mechanical Engineering | National |
43 | Ravinder Kumar | Experimental study on pull down and energy consumption characteristics with additives in VCR incorporated with SLHX | Conference on Recent Trends in Mechanical Engineering | National |
44 | Sagar Setia | Implementation of Six Sigma in Small & Large scale Industries-A Study | An annual research journal,GGGI,Dinarpur | National |
45 | Sagar Setia | Performance Analysis & Emission characteristion of various blends of Mustard oil on Automotive C.I Multicylinder Engine | An annual research journal,GGGI,Dinarpur | National |
46 | Sagar Setia | Optimization of kirloskar made single cylinder diesel engine by using response surface methodology | National Conference on Recent Advances in Engineering Technology | National |
Facilities for Students:
Special attention on weaker students
Extra classes
Student counselling
Timely telephonic conversation with parents
Equity action plan
Increasing practical skills
Motivation
PPTs, Videos and links provided
Weekly class tests
Short term courses
Expert talks
Arranging Seminars etc.
Facilities for Faculty:
Mess facility with vegetarian meals only.
In campus dispensary to provide medical assistance to faculty.
Free parking two wheeler/car facilities at designated places only. (Without charges).
5 eating joints at different locations.
Power backup for light load.
Free internet connectivity through personal login portal service.
ATM facility inside the campus.
For safety and security CCTV cameras are also present.
Presence of Online library access catalogue.